dmesg - INTEL SSDSCKGW08 - eVGA NVIDIA GeForce GT 740
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.0-0.rc3.git1.2.fc22.1.x86_64 (mockbuild@buildvm-10.phx2.fedoraproject.org) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Wed Nov 5 00:04:31 UTC 2014
Command line: BOOT_IMAGE=/vmlinuz-3.18.0-0.rc3.git1.2.fc22.1.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000392bdfff] usable
BIOS-e820: [mem 0x00000000392be000-0x0000000039e2dfff] reserved
BIOS-e820: [mem 0x0000000039e2e000-0x000000003a0f6fff] usable
BIOS-e820: [mem 0x000000003a0f7000-0x000000003ac8ffff] ACPI NVS
BIOS-e820: [mem 0x000000003ac90000-0x000000003b619fff] reserved
BIOS-e820: [mem 0x000000003b61a000-0x000000003b61afff] usable
BIOS-e820: [mem 0x000000003b61b000-0x000000003b6a0fff] reserved
BIOS-e820: [mem 0x000000003b6a1000-0x000000003b8b7fff] usable
BIOS-e820: [mem 0x000000003b8b8000-0x000000003bff8fff] reserved
BIOS-e820: [mem 0x000000003bff9000-0x000000003bffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x32877018-0x32897057] usable ==> usable
e820: update [mem 0x32865018-0x32876057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x0000000032865017] usable
reserve setup_data: [mem 0x0000000032865018-0x0000000032876057] usable
reserve setup_data: [mem 0x0000000032876058-0x0000000032877017] usable
reserve setup_data: [mem 0x0000000032877018-0x0000000032897057] usable
reserve setup_data: [mem 0x0000000032897058-0x00000000392bdfff] usable
reserve setup_data: [mem 0x00000000392be000-0x0000000039e2dfff] reserved
reserve setup_data: [mem 0x0000000039e2e000-0x000000003a0f6fff] usable
reserve setup_data: [mem 0x000000003a0f7000-0x000000003ac8ffff] ACPI NVS
reserve setup_data: [mem 0x000000003ac90000-0x000000003b619fff] reserved
reserve setup_data: [mem 0x000000003b61a000-0x000000003b61afff] usable
reserve setup_data: [mem 0x000000003b61b000-0x000000003b6a0fff] reserved
reserve setup_data: [mem 0x000000003b6a1000-0x000000003b8b7fff] usable
reserve setup_data: [mem 0x000000003b8b8000-0x000000003bff8fff] reserved
reserve setup_data: [mem 0x000000003bff9000-0x000000003bffffff] usable
reserve setup_data: [mem 0x0000000040000000-0x000000004fffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000004bfffffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x3a907000 ACPI 2.0=0x3a907000 SMBIOS=0xf0570 MPS=0xfd630
efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x0000000000009000) (0MB)
efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000009000-0x000000000003f000) (0MB)
efi: mem03: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x00000000022da000) (18MB)
efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000022da000-0x0000000010000000) (221MB)
efi: mem08: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000010000000-0x000000001000b000) (0MB)
efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000001000b000-0x0000000019751000) (151MB)
efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000019751000-0x00000000266d0000) (207MB)
efi: mem11: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000266d0000-0x0000000026750000) (0MB)
efi: mem12: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000026750000-0x0000000032865000) (193MB)
efi: mem13: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000032865000-0x0000000033cd6000) (20MB)
efi: mem14: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000033cd6000-0x0000000033dfd000) (1MB)
efi: mem15: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000033dfd000-0x0000000033e24000) (0MB)
efi: mem16: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000033e24000-0x0000000033f4b000) (1MB)
efi: mem17: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000033f4b000-0x00000000388ea000) (73MB)
efi: mem18: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000388ea000-0x0000000038ae1000) (1MB)
efi: mem19: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000038ae1000-0x00000000392be000) (7MB)
efi: mem20: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000392be000-0x0000000039e2e000) (11MB)
efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000039e2e000-0x000000003a0f7000) (2MB)
efi: mem22: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000003a0f7000-0x000000003ac90000) (11MB)
efi: mem23: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000003ac90000-0x000000003b5b9000) (9MB)
efi: mem24: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000003b5b9000-0x000000003b61a000) (0MB)
efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000003b61a000-0x000000003b61b000) (0MB)
efi: mem26: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000003b61b000-0x000000003b6a1000) (0MB)
efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000003b6a1000-0x000000003b8b8000) (2MB)
efi: mem28: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000003b8b8000-0x000000003bff9000) (7MB)
efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000003bff9000-0x000000003c000000) (0MB)
efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x00000004c0000000) (15360MB)
efi: mem31: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x0000000040000000-0x0000000050000000) (256MB)
efi: mem32: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
efi: mem33: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.8 present.
DMI: MSI MS-7885/X99S SLI PLUS (MS-7885), BIOS 1.30 09/25/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000040000000 mask 3FFFC0000000 uncachable
2 base 380000000000 mask 3FC000000000 uncachable
3 base 00003F000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 base 0000F0000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] mapped at [ffff8800000fd8f0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0202f000, 0x0202ffff] PGTABLE
BRK [0x02030000, 0x02030fff] PGTABLE
BRK [0x02031000, 0x02031fff] PGTABLE
init_memory_mapping: [mem 0x4bfe00000-0x4bfffffff]
[mem 0x4bfe00000-0x4bfffffff] page 1G
init_memory_mapping: [mem 0x4bc000000-0x4bfdfffff]
[mem 0x4bc000000-0x4bfdfffff] page 1G
init_memory_mapping: [mem 0x480000000-0x4bbffffff]
[mem 0x480000000-0x4bbffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x392bdfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x391fffff] page 2M
[mem 0x39200000-0x392bdfff] page 4k
init_memory_mapping: [mem 0x39e2e000-0x3a0f6fff]
[mem 0x39e2e000-0x3a0f6fff] page 4k
BRK [0x02032000, 0x02032fff] PGTABLE
BRK [0x02033000, 0x02033fff] PGTABLE
init_memory_mapping: [mem 0x3b61a000-0x3b61afff]
[mem 0x3b61a000-0x3b61afff] page 4k
BRK [0x02034000, 0x02034fff] PGTABLE
init_memory_mapping: [mem 0x3b6a1000-0x3b8b7fff]
[mem 0x3b6a1000-0x3b8b7fff] page 4k
init_memory_mapping: [mem 0x3bff9000-0x3bffffff]
[mem 0x3bff9000-0x3bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x47fffffff]
[mem 0x100000000-0x47fffffff] page 1G
RAMDISK: [mem 0x32899000-0x33ac8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003A907000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A907098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003A933BA8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003A9071D8 02C9CB (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000003AC8CF80 000040
ACPI: APIC 0x000000003A933CB8 000138 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003A933DF0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000003A933E38 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003A933ED8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x000000003A933F18 000042 (v01 00000000 00000000)
ACPI: BDAT 0x000000003A933F60 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000003A933F90 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000003A933FC8 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x000000003A934058 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x000000003A9340C0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000003A9340F0 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000003A934F48 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000003A934F88 00D647 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: DMAR 0x000000003A9425D0 0000E4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x000000003A9426B8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x000000003A942758 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x4bfffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x4bffe8000-0x4bfffbfff]
[ffffea0000000000-ffffea0012ffffff] PMD -> [ffff8804af600000-ffff8804bf5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x4bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x392bdfff]
node 0: [mem 0x39e2e000-0x3a0f6fff]
node 0: [mem 0x3b61a000-0x3b61afff]
node 0: [mem 0x3b6a1000-0x3b8b7fff]
node 0: [mem 0x3bff9000-0x3bffffff]
node 0: [mem 0x100000000-0x4bfffffff]
Initmem setup node 0 [mem 0x00001000-0x4bfffffff]
On node 0 totalpages: 4167493
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 3615 pages used for memmap
DMA32 zone: 231334 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x32865000-0x32865fff]
PM: Registered nosave memory: [mem 0x32876000-0x32876fff]
PM: Registered nosave memory: [mem 0x32877000-0x32877fff]
PM: Registered nosave memory: [mem 0x32897000-0x32897fff]
PM: Registered nosave memory: [mem 0x392be000-0x39e2dfff]
PM: Registered nosave memory: [mem 0x3a0f7000-0x3ac8ffff]
PM: Registered nosave memory: [mem 0x3ac90000-0x3b619fff]
PM: Registered nosave memory: [mem 0x3b61b000-0x3b6a0fff]
PM: Registered nosave memory: [mem 0x3b8b8000-0x3bff8fff]
PM: Registered nosave memory: [mem 0x3c000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff8804bfc00000 s88576 r8192 d30208 u131072
pcpu-alloc: s88576 r8192 d30208 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4102350
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.0-0.rc3.git1.2.fc22.1.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rhgb quiet LANG=en_US.UTF-8
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 16217752K/16669972K available (7555K kernel code, 1203K rwdata, 3252K rodata, 1492K init, 1548K bss, 452220K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS:65792 nr_irqs:960 0
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-15.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3199.973 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.94 BogoMIPS (lpj=3199973)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea3000 - ffffffff81eaa000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 27195 entries in 107 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffd000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000003b491000 end: 0x0000003b4a0fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1
HPET id 0 under DRHD base 0xfbffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1680 v3 @ 3.20GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 1287163286724 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (102399.13 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x3a0f7000-0x3ac8ffff] (12161024 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 21:06:34, date: 11/06/14
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb33d000-0xfb33dfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb320000-0xfb32ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb33c000-0xfb33c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb300000-0xfb31ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb339000-0xfb339fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb338000-0xfb3383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb330000-0xfb333fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb337000-0xfb3373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb336000-0xfb3367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb335000-0xfb3350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:0fc8] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb200fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:06:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
pci 0000:06:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x32865018-0x33ffffff]
e820: reserve RAM buffer [mem 0x32877018-0x33ffffff]
e820: reserve RAM buffer [mem 0x392be000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3a0f7000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b61b000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b8b8000-0x3bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x059f] has been reserved
system 00:02: [io 0x0600-0x061f] has been reserved
system 00:02: [io 0x0880-0x0883] has been reserved
system 00:02: [io 0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x50000000-0xfbffbfff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:06: resource 1 [mem 0xfb100000-0xfb1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18624K (ffff880032899000 - ffff880033ac9000)
dmar: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
dmar: [Firmware Bug]: RMRR entry for device 06:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x2e865000-0x32865000] (64MB) mapped at [ffff88002e865000-ffff880032864fff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1415307994.510:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31880
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 25 for MSI/MSI-X
pcieport 0000:00:02.0: irq 27 for MSI/MSI-X
pcieport 0000:00:03.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 31 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 32 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, mapped to 0xffffc90011d00000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
platform serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
platform serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 33 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfb336000 port 0xfb336300 irq 33
ata6: DUMMY
libphy: Fixed MDIO Bus: probed
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: irq 34 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: irq 35 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 36 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 37 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 38 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 39 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 40 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 42 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb338000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb337000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 3.18.0-0.rc3.git1.2.fc22.1.x86_64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 462af0c24acfbbf5fece6770ab258cece6ab5083'
registered taskstats version 1
Magic number: 6:773:145
ata_port ata2: hash matches
ata2: hash matches
acpi device:16: hash matches
rtc_cmos 00:01: setting system clock to 2014-11-06 21:06:35 UTC (1415307995)
PM: Hibernation image not present or could not be loaded.
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 3-1: new high-speed USB device number 2 using xhci_hcd
ata5.00: ATA-9: INTEL SSDSCKGW080A4, DC01, max UDMA/133
ata5.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA INTEL SSDSCKGW08 DC01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1492K (ffffffff81d2e000 - ffffffff81ea3000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 624K (ffff880001764000 - ffff880001800000)
Freeing unused kernel memory: 844K (ffff880001b2d000 - ffff880001c00000)
random: systemd urandom read with 2 bits of entropy available
usb 7-1: new high-speed USB device number 2 using ehci-pci
usb 8-1: new high-speed USB device number 2 using ehci-pci
usb 5-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=2109, idProduct=3431
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 7-1: New USB device found, idVendor=8087, idProduct=800a
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 6 ports detected
usb 8-1: New USB device found, idVendor=8087, idProduct=8002
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 8 ports detected
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
usb 3-1.3: new low-speed USB device number 3 using xhci_hcd
usb 5-1: New USB device found, idVendor=0403, idProduct=6001
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: FT232R USB UART
usb 5-1: Manufacturer: FTDI
usb 5-1: SerialNumber: A800fq8V
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
MXM: GUID detected in BIOS
checking generic (f1000000 300000) vs hw (e0000000 10000000)
checking generic (f1000000 300000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from EFI VGA
Console: switching to colour dummy device 80x25
nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0e7080a2
nouveau [ DEVICE][0000:03:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:03:00.0] Family : NVE0
nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:03:00.0] ... signature not found
nouveau [ VBIOS][0000:03:00.0] checking PROM for image...
usb 3-1.3: New USB device found, idVendor=04f2, idProduct=0833
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3: Product: USB Keyboard
usb 3-1.3: Manufacturer: CHICONY
usb 3-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:04F2:0833.0001/input/input5
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:05:00.0-1.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:04F2:0833.0002/input/input6
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:05:00.0-1.3/input1
nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
nouveau [ VBIOS][0000:03:00.0] using image from PROM
nouveau [ VBIOS][0000:03:00.0] BIT signature found
nouveau [ VBIOS][0000:03:00.0] version 80.07.d9.00.20
nouveau 0000:03:00.0: irq 44 for MSI/MSI-X
nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
nouveau [ PFB][0000:03:00.0] RAM type: GDDR5
nouveau [ PFB][0000:03:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
usb 3-1.4: new full-speed USB device number 4 using xhci_hcd
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:8a:5b:d7:87:e9
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
usb 3-1.4: New USB device found, idVendor=1532, idProduct=0012
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: Razer Salmosa
usb 3-1.4: Manufacturer: Razer
input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:1532:0012.0003/input/input7
hid-generic 0003:1532:0012.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:05:00.0-1.4/input0
nouveau [ PTHERM][0000:03:00.0] FAN control: PWM
nouveau [ PTHERM][0000:03:00.0] fan management: automatic
nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
nouveau [ CLK][0000:03:00.0] 07: core 324 MHz memory 648 MHz
nouveau [ CLK][0000:03:00.0] 0a: core 540 MHz memory 1620 MHz
nouveau [ CLK][0000:03:00.0] 0f: core 1084 MHz memory 5000 MHz
nouveau [ CLK][0000:03:00.0] --: core 324 MHz memory 648 MHz
[TTM] Zone kernel: Available graphics memory: 8162768 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 01000f02 00020030
nouveau [ DRM] DCB outp 01: 02000f00 00000000
nouveau [ DRM] DCB outp 02: 08011f82 00020030
nouveau [ DRM] DCB outp 03: 02022f62 00020010
nouveau [ DRM] DCB conn 00: 00001030
nouveau [ DRM] DCB conn 01: 00002131
nouveau [ DRM] DCB conn 02: 00010263
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff8804a51a7000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:03:00.0: registered panic notifier
[drm] Initialized nouveau 1.2.1 20120801 for 0000:03:00.0 on minor 0
PM: Starting manual resume from disk
PM: Hibernation image partition 253:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[237]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1415307997.885:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 103124 rules.
SELinux: 2048 avtab hash slots, 103124 rules.
SELinux: 8 users, 102 roles, 4962 types, 294 bools, 1 sens, 1024 cats
SELinux: 83 classes, 103124 rules
SELinux: Permission audit_read in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev drm, type drm), not configured for labeling
SELinux: initialized (dev dm-0, type ext4), uses xattr
audit: type=1403 audit(1415307997.980:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 102.914ms.
systemd[1]: Relabelled /dev and /run in 27.627ms.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
EXT4-fs (dm-0): re-mounted. Opts: (null)
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
alg: No test for crc32 (crc32-pclmul)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
Adding 7815164k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:7815164k SSFS
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
audit: type=1305 audit(1415307998.900:4): audit_pid=837 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
random: nonblocking pool is initialized
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
systemd-journald[640]: Received request to flush runtime journal from PID 1
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
usbcore: registered new interface driver ftdi_sio
ftdi_sio 5-1:1.0: FTDI USB Serial Device converter detected
usb 5-1: Detected FT232RL
usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered forwarding state
virbr0: port 1(virbr0-nic) entered forwarding state
virbr0: port 1(virbr0-nic) entered disabled state
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
fuse init (API version 7.23)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
perf interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
epiphany[9463]: segfault at 1 ip 00007f37736694b6 sp 00007fff0ef7dcf0 error 4 in libglib-2.0.so.0.4200.0[7f3773603000+136000]
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs